Sind diese Einstellungen passend, wenn ich dafür sorgen will das nur der Localhost zugriff auf Postgre bekommt?
Ich gehe davon aus da halt 127.0.0.1/32 bei der Adresse steht aber ich frage mal lieber nach
Der Zugriff allein Über Unix Socket funktioniert leider nicht. Da hab ich offensichtlich das Prinzip von den Sockets denke ich nicht verstanden
Was ich nämlich schade finde ist mit den Einstellungen sehe ich das mein Port 5432 offen ist was zu 99% von Postgre kommt
PostgreSQL Client Authentication Configuration File
===================================================
Refer to the “Client Authentication” section in the PostgreSQL
documentation for a complete description of this file. A short
synopsis follows.
This file controls: which hosts are allowed to connect, how clients
are authenticated, which PostgreSQL user names they can use, which
databases they can access. Records take one of these forms:
local DATABASE USER METHOD [OPTIONS]
host DATABASE USER ADDRESS METHOD [OPTIONS]
hostssl DATABASE USER ADDRESS METHOD [OPTIONS]
hostnossl DATABASE USER ADDRESS METHOD [OPTIONS]
(The uppercase items must be replaced by actual values.)
The first field is the connection type: “local” is a Unix-domain
socket, “host” is either a plain or SSL-encrypted TCP/IP socket,
“hostssl” is an SSL-encrypted TCP/IP socket, and “hostnossl” is a
plain TCP/IP socket.
DATABASE can be “all”, “sameuser”, “samerole”, “replication”, a
database name, or a comma-separated list thereof. The “all”
keyword does not match “replication”. Access to replication
must be enabled in a separate record (see example below).
USER can be “all”, a user name, a group name prefixed with “+”, or a
comma-separated list thereof. In both the DATABASE and USER fields
you can also write a file name prefixed with “@” to include names
from a separate file.
ADDRESS specifies the set of hosts the record matches. It can be a
host name, or it is made up of an IP address and a CIDR mask that is
an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
specifies the number of significant bits in the mask. A host name
that starts with a dot (.) matches a suffix of the actual host name.
Alternatively, you can write an IP address and netmask in separate
columns to specify the set of hosts. Instead of a CIDR-address, you
can write “samehost” to match any of the server’s own IP addresses,
or “samenet” to match any address in any subnet that the server is
directly connected to.
METHOD can be “trust”, “reject”, “md5”, “password”, “gss”, “sspi”,
“krb5”, “ident”, “peer”, “pam”, “ldap”, “radius” or “cert”. Note that
“password” sends passwords in clear text; “md5” is preferred since
it sends encrypted passwords.
OPTIONS are a set of options for the authentication in the format
NAME=VALUE. The available options depend on the different
authentication methods – refer to the “Client Authentication”
section in the documentation for a list of which options are
available for which authentication methods.
Database and user names containing spaces, commas, quotes and other
special characters must be quoted. Quoting one of the keywords
“all”, “sameuser”, “samerole” or “replication” makes the name lose
its special character, and just match a database or username with
that name.
This file is read on server startup and when the postmaster receives
a SIGHUP signal. If you edit the file on a running system, you have
to SIGHUP the postmaster for the changes to take effect. You can
use “pg_ctl reload” to do that.
Put your actual configuration here
----------------------------------
If you want to allow non-local connections, you need to add more
“host” records. In that case you will also need to make PostgreSQL
listen on a non-local interface via the listen_addresses
configuration parameter, or via the -i or -h command line switches.
\
DO NOT DISABLE!
If you change this first entry you will need to make sure that the
database superuser can access the database using some other method.
Noninteractive access to all databases is required during automatic
maintenance (custom daily cronjobs, replication, and similar tasks).
Database administrative login by Unix domain socket
local all postgres peer
TYPE DATABASE USER ADDRESS METHOD
“local” is for Unix domain socket connections only
local all all peer
IPv4 local connections:
host all all 127.0.0.1/32 md5
IPv6 local connections:
host all all ::1/128 md5
Allow replication connections from localhost, by a user with the
replication privilege.
#local replication postgres peer
#host replication postgres 127.0.0.1/32 md5
#host replication postgres ::1/128 md5
castorp
20. Februar 2014 um 20:08
2
Zu den Einstellungen kann ich nichts sagen, aber: es heißt Postgres oder PostgreSQL (oder einfach nur pg), aber nicht “Postgre”
Thomas_Report:
Sind diese Einstellungen passend, wenn ich dafür sorgen will das nur der Localhost zugriff auf Postgre bekommt?
Ich gehe davon aus da halt 127.0.0.1/32 bei der Adresse steht aber ich frage mal lieber nach
Der Zugriff allein Über Unix Socket funktioniert leider nicht. Da hab ich offensichtlich das Prinzip von den Sockets denke ich nicht verstanden
Was ich nämlich schade finde ist mit den Einstellungen sehe ich das mein Port 5432 offen ist was zu 99% von Postgre kommt
“peer” ist gleich zu “ident”: der Unix-User muß gleich dem DB-User sein. Das hast bei ‘local’ eingestellt. Also, wenn Du via sudo zu ‘postres’ wirst kannst Dich dann als ‘postgres’ an der DB anmelden.
Ansonsten sieht es für mich so aus, daß man sich wirklich nur von 127.0.0.1 anmelden kann.
Den Port hast Du offenbar derzeit auf
listen_addresses = “*” gesetzt, Du kannst das gerne auf localhost begrenzen. Dann lauscht er nur noch an der lokalen 127.0.0.1.
Du kannst das mit netstat prüfen, mal so als Hinweis…
Andreas
akretschmer:
Thomas_Report:
Sind diese Einstellungen passend, wenn ich dafür sorgen will das nur der Localhost zugriff auf Postgre bekommt?
Ich gehe davon aus da halt 127.0.0.1/32 bei der Adresse steht aber ich frage mal lieber nach
Der Zugriff allein Über Unix Socket funktioniert leider nicht. Da hab ich offensichtlich das Prinzip von den Sockets denke ich nicht verstanden
Was ich nämlich schade finde ist mit den Einstellungen sehe ich das mein Port 5432 offen ist was zu 99% von Postgre kommt
Den Port hast Du offenbar derzeit auf
listen_addresses = “*” gesetzt, Du kannst das gerne auf localhost begrenzen. Dann lauscht er nur noch an der lokalen 127.0.0.1.
Du kannst das mit netstat prüfen, mal so als Hinweis…
Andreas
Tut mir leid aber den listen_addresses teil habe ich jetzt leider nicht ganz verstanden.
Also ich selber habe zu 99.999% nirgendwo in die confi listen_addresses = “*” geschrieben.
In der confi steht nur einmal was von listen_addresses und das ist kommentiert # xD
Mein Ports habe ich übrigens mit Zenmap überprüft.
Thomas_Report:
Tut mir leid aber den listen_addresses teil habe ich jetzt leider nicht ganz verstanden.
Also ich selber habe zu 99.999% nirgendwo in die confi listen_addresses = “*” geschrieben.
In der confi steht nur einmal was von listen_addresses und das ist kommentiert # xD
Mein Ports habe ich übrigens mit Zenmap überprüft.
Ja, in der postgresql.conf stehen alle Default-Werte mit einem Kommentarzeichen. Will man diese verändern, entfernt man dieses und ändert es.
Hast Du Windows oder *NIX? Windows kennt keine Unix-Socken, da geht NUR TCP/IP, als host - Zugriff, und da ist default listen_adresses auf * gesetzt.
akretschmer:
Thomas_Report:
Tut mir leid aber den listen_addresses teil habe ich jetzt leider nicht ganz verstanden.
Also ich selber habe zu 99.999% nirgendwo in die confi listen_addresses = “*” geschrieben.
In der confi steht nur einmal was von listen_addresses und das ist kommentiert # xD
Mein Ports habe ich übrigens mit Zenmap überprüft.
Ja, in der postgresql.conf stehen alle Default-Werte mit einem Kommentarzeichen. Will man diese verändern, entfernt man dieses und ändert es.
Hast Du Windows oder *NIX? Windows kennt keine Unix-Socken, da geht NUR TCP/IP, als host - Zugriff, und da ist default listen_adresses auf * gesetzt.
Ich hab Debian .
Nach hinzufügen von Liste_Adress habe ich ein neues Problem
pgadmin meldet mir.
Server doesn’t listen
The server doesn’t accept connections: the connection library reports
konnte nicht mit dem Server verbinden: Verbindungsaufbau abgelehnt Läuft der Server auf dem Host »localhost« (::1) und akzeptiert er TCP/IP-Verbindungen auf Port 5432? konnte nicht mit dem Server verbinden: Verbindungsaufbau abgelehnt Läuft der Server auf dem Host »localhost« (127.0.0.1) und akzeptiert er TCP/IP-Verbindungen auf Port 5432?
Hier meine config.
PostgreSQL Client Authentication Configuration File
===================================================
Refer to the “Client Authentication” section in the PostgreSQL
documentation for a complete description of this file. A short
synopsis follows.
This file controls: which hosts are allowed to connect, how clients
are authenticated, which PostgreSQL user names they can use, which
databases they can access. Records take one of these forms:
local DATABASE USER METHOD [OPTIONS]
host DATABASE USER ADDRESS METHOD [OPTIONS]
hostssl DATABASE USER ADDRESS METHOD [OPTIONS]
hostnossl DATABASE USER ADDRESS METHOD [OPTIONS]
(The uppercase items must be replaced by actual values.)
The first field is the connection type: “local” is a Unix-domain
socket, “host” is either a plain or SSL-encrypted TCP/IP socket,
“hostssl” is an SSL-encrypted TCP/IP socket, and “hostnossl” is a
plain TCP/IP socket.
DATABASE can be “all”, “sameuser”, “samerole”, “replication”, a
database name, or a comma-separated list thereof. The “all”
keyword does not match “replication”. Access to replication
must be enabled in a separate record (see example below).
USER can be “all”, a user name, a group name prefixed with “+”, or a
comma-separated list thereof. In both the DATABASE and USER fields
you can also write a file name prefixed with “@” to include names
from a separate file.
ADDRESS specifies the set of hosts the record matches. It can be a
host name, or it is made up of an IP address and a CIDR mask that is
an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
specifies the number of significant bits in the mask. A host name
that starts with a dot (.) matches a suffix of the actual host name.
Alternatively, you can write an IP address and netmask in separate
columns to specify the set of hosts. Instead of a CIDR-address, you
can write “samehost” to match any of the server’s own IP addresses,
or “samenet” to match any address in any subnet that the server is
directly connected to.
METHOD can be “trust”, “reject”, “md5”, “password”, “gss”, “sspi”,
“krb5”, “ident”, “peer”, “pam”, “ldap”, “radius” or “cert”. Note that
“password” sends passwords in clear text; “md5” is preferred since
it sends encrypted passwords.
OPTIONS are a set of options for the authentication in the format
NAME=VALUE. The available options depend on the different
authentication methods – refer to the “Client Authentication”
section in the documentation for a list of which options are
available for which authentication methods.
Database and user names containing spaces, commas, quotes and other
special characters must be quoted. Quoting one of the keywords
“all”, “sameuser”, “samerole” or “replication” makes the name lose
its special character, and just match a database or username with
that name.
This file is read on server startup and when the postmaster receives
a SIGHUP signal. If you edit the file on a running system, you have
to SIGHUP the postmaster for the changes to take effect. You can
use “pg_ctl reload” to do that.
Put your actual configuration here
----------------------------------
If you want to allow non-local connections, you need to add more
“host” records. In that case you will also need to make PostgreSQL
listen on a non-local interface via the listen_addresses
configuration parameter, or via the -i or -h command line switches.
listen_addresses = “127.0.0.1”
\
DO NOT DISABLE!
If you change this first entry you will need to make sure that the
database superuser can access the database using some other method.
Noninteractive access to all databases is required during automatic
maintenance (custom daily cronjobs, replication, and similar tasks).
Database administrative login by Unix domain socket
local all postgres peer
TYPE DATABASE USER ADDRESS METHOD
“local” is for Unix domain socket connections only
local all all peer
IPv4 local connections:
host all all 127.0.0.1/32 md5
IPv6 local connections:
host all all ::1/128 md5
Allow replication connections from localhost, by a user with the
replication privilege.
#local replication postgres peer
#host replication postgres 127.0.0.1/32 md5
#host replication postgres ::1/128 md5